Drivers Marvell 88se9128 Drivers

Try Amazon Prime! If you are missing the Marvell 91xx Config ATA Device Driver, here. Oct 20, 2009 - Installs the Marvell (RAID) driver version 1.2.0.7103 for Intel® Desktop Boards. Driver Sweeper allows you to remove driver leftovers from your system. It's very important to remove your drivers on a proper way, because driver leftovers can. Re:Marvell 91xx SATA 6Gb/s Controller Update 2012/05/30 17:09:30 1.2.0.1020 are just the drivers for marvel, im talking about firmware which you need to put on a usb or burn to cd so you couldnt of done that its on here to download 1701 which i think turns into 1.0.0.1028 when you bootup also on station drivers.

In case anyone else out there is looking for a working driver for their Marvell SATA (and eSATA in my case) chips, I found this one worked. My system is a Z68A-GD80.

But any board that has the same chipset (88SE9128) should have decent luck. 1) 2) Extract the folder '88SE91xx' somewhere 3) Find the sub-directory with the driver: '88SE91xx Windows Win_64bit ' (obviously use the 32bit directory if you for some reason didn't use Win10 64bit). 4) Right-click on 'mv91xx.inf' 5) Select the 'install' option. If you have a drive connected to your eSATA port it should just open up.

Most if not all of my other devices, except the Realtek audio that MSI has a download available for, 'just worked' for Win10. Free Zip Code Dma Mapping on this page. I would love to hear of better drivers for various devices if they are out there. But otherwise this satisfied my last install issue.

I use eSATA for backing up to swappable drives. I don't bother with the Marvell 6Gb port since it is PCIe limited, but this might also be handy if anyone out there is needing to connect 7 internal drives.